WP03 · Cooling Loop

process zone · floor 1 · low light

Inspections OK

73%

11 of 15 actions

Failures by type

sensor timeout1

reading unreliable1

path blocked1

target not detected1

Anomalies by severity

HIGH1

MEDIUM1

LOW1

Success by config here

V167% (8/12)

V2100% (3/3)

Where it is

WP03 marked on the two-floor map

Floor 1

Floor 2

Color = share of inspections OK there (green ≥ 85%, yellow ≥ 70%, red below). Size = anomaly count. Dashed ring = outdoor leg (assumed).

Assets

Every action here references an asset registered at this waypoint.

Registered here (assets.csv)

Every action at WP03

15 actions across all missions, in kit time order

Mission	Kit time	Asset	Inspection	Result	Reading	Anomaly
M001	09-01 18:27	HX-208 Heat Exchanger 08	visual	sensor timeout	75 scorequestionable	HIGH visual defect
M002	09-02 02:21	HX-208 Heat Exchanger 08	gauge reading	OK	122.2 psi
M002	09-02 02:24	HX-208 Heat Exchanger 08	gauge reading	OK	104.7 psi
M005	09-03 02:25	HX-208 Heat Exchanger 08	thermal	OK	60 C
M006	09-03 10:12	HX-208 Heat Exchanger 08	visual	OK	72 score
M006	09-03 10:21	HX-208 Heat Exchanger 08	visual	reading unreliable	90 scorequestionable	MEDIUM visual defect
M010	09-04 18:29	HX-208 Heat Exchanger 08	navigation	path blocked	37.5 pctquestionable
M010	09-04 18:33	HX-208 Heat Exchanger 08	gauge reading	OK	150.6 psi
M011	09-05 02:19	HX-208 Heat Exchanger 08	navigation	OK	81.8 pct
M015	09-06 10:17	HX-208 Heat Exchanger 08	acoustic	OK	82.4 dB
M015	09-06 10:27	HX-208 Heat Exchanger 08	visual	OK	none
M017	09-07 02:24	HX-208 Heat Exchanger 08	gauge reading	target not detected	124.2 psiquestionable	LOW gauge out of range
M023	09-09 02:21	HX-208 Heat Exchanger 08	visual	OK	none
M026	09-10 02:04	HX-208 Heat Exchanger 08	gauge reading	OK	101.4 psi
M027	09-10 10:25	HX-208 Heat Exchanger 08	gauge reading	OK	125.5 psi